CPC Broyeurs à marteaux

Hammer mills are used for crushing medium-hard and soft materials (coal, limestone, gypsum, clay, marl, salts, phosphates, etc.).
The processing of feed material with increased moisture is also possible in CPC hammer mills.
Grinding drying by feeding hot process gas (e.g. flue gas from a combustion) into the hammer mill

To break coarse grain, the feed material is caught by the impact hammers and thrown against the upper area of the grinding wall (impact wall).
In the middle area of the grinding wall, the material to be ground is ground and shaped
In the lower area, the material to be ground can be classified by using a grinding grate (usually bar grate depending on the application, optional)

Modular hammer design consisting of hammer handle and hammer head (separate replacement of hammer heads)
Long service life due to bimetal hammer heads made of an extremely hard chrome alloy on a tough hard carrier material
The rigidity of the rotor is achieved by high preload (several 100 to) during production, thus no deflection even at widths of up to 3 meters.
The rotor is dynamically balanced according to DIN 1940 quality G6.3
Drive by means of V-belt or direct drive
Reversible direction of rotation, thus extending maintenance intervals, longer travel times and reduced spare parts costs due to use of the hammer heads on both sides
The grinding gap can be adjusted from the outside.
Very good accessibility due to hydraulically foldable grinding walls for inspection and maintenance.
The adherence of moist adhesive material on the grinding walls can be prevented by heating with electrically heated thermal oil (option)
A local operating station with control and monitoring function (PLC) is standard equipment.
The bearings are lubricated by a central lubrication station.
The hammer mill can be mounted on a base plate with vibration dampers (option)
Optional sound enclosure for sound pressure level <80 dB(A), maintenance-friendly design with quick-release fasteners.