HYBRID CRUSHER
HC 15
Features
- Solution for hard, medium-hard, and soft materials (ores,
limestone, salt, coal, clay, oil shale etc.) - Weld-on hard-faced crushing teeth with various configurations
for most difficult applications - Integrated flywheel equalizing torque peeks, thus reducing
required motor power - Permanent parallel position of crushing rolls due to hydraulic
“Cross Junction” even in case of partial overload - Efficient crushing of material with less content of fines and low
dust emissions - Monitoring by local operator panel
PRIMARY STAGE
Crushing segments quick-change
SECONDARY STAGE
Crushing segments
Advantages
- Highest lifetime of crushing segments
- Fully automatic operation
- Generation of various degrees of product fineness
- High experience in custom-tailored product particle size distribution
- Fast and efficient maintenance of crushing segments
- Fully sensor-controlled to avoid downtimes
Application
- Coarse size reduction of hard, medium-hard and soft material (lime stone, dolomite, magnesia, salt, coal, clay, oil shale etc.)
- Throughput up to5.500 mt/hr, depending on material characteristic and particle size
- Feed material size up to 1,500mm, product particle size down to 300mm possible, 50mm for secondary crushing stage
- Design of crushing teeth according to the material requirements (number, size, position, form, hardness)
Mode of operation
- Combination of the characteristic of the Double Roll Crusher with the performance of the Sizer
- Crushing of feed material by teeth of the two counter-rotating rolls. Successive comminution of larger lumps
- Product particle size regulated by precise setting of the roll gap
- Opening of the gap between the crushing rolls in case of overload (e.g. caused by an unbreakable foreign object) within milliseconds to let that piece pass thus avoiding a shut-down
- Crushing teeth in a spiral on the shaft equalizing torque peeks
- No clogging of the rolls by sticky material due to specifically designed scrapers
- Final product with small portion of fines due to limited speed of the rolls
SOLUTION PROVIDER
Sustainable value enhancement of existing equipment with regards to
- Satisfying continuous operation
- Whole lifecycle
